Water care
Spa water calculator: pH, alkalinity and chlorine
Enter what you measured. You will see straight away how many grams of which product to add, and in which order.
- Alkalinity80-120 mg/l
- pH7.2-7.6
- Free chlorine1-3 mg/l
Loading photoAt our customers’ homes
This is how spa water should look
Accurate measuring
Measure with these three meters, not strips
A calculation is only as good as your measurement. Test strips give a colour band where you have to guess between two steps. That is why we advise these three meters together for use at home. You can also buy them from us.
Hanna pH tester (HI981274)Waterproof, with a replaceable electrode, also measures temperature. Calibrate it regularly.€137.94Order
Hanna Checker free chlorine (HI7014)Photometer with a range up to 2.50 mg/l. If it flashes at 2.50, you are above that.€85.91Order
Hanna Checker alkalinity (HI7754)Gives alkalinity as a number in mg/l, the first value you adjust.€85.91Order
Available from us
Order the meters from Sunspa ’t Gooi
All three together cost €289 instead of €309.76 incl. VAT. Questions about measuring or calibrating? Carlo or Max will help.
Order the set
Automatic measuring and dosing
Hanna Security Pool Plus
Psst… Take a moment for this one, and you never have to keep an eye on your water quality yourself again.
Rather not measure and adjust yourself every week? This system continuously measures pH, redox and temperature. Redox is a measure of how well the chlorine is working. Two dosing pumps add pH-minus and chlorine by themselves whenever needed.
- Measures pH, redox and temperature at the same time
- Two dosing pumps for pH-minus and chlorine
- Alarm and stop when values are off
- Advice from Carlo and Max on connecting it to your spa
Check the values now and then with your own meters: the electrode needs regular calibration.
Request free advice
Frequently asked questions
About adjusting spa water
Updated 28 October 2026
In which order should I adjust the water?
First alkalinity, then pH, then chlorine. Alkalinity buffers the pH: if it is too low, the pH keeps jumping. Chlorine only works properly once the pH is between 7.2 and 7.6.
What values should my spa water have?
pH 7.2 to 7.6, total alkalinity 80 to 120 mg/l and free chlorine 1 to 3 mg/l.
Why do you advise meters instead of test strips?
Strips show a colour band, so you guess between steps. A digital pH tester, the Hanna Checker for free chlorine and the Hanna Checker for alkalinity give an exact number. Your dosage is then right first time.
Which products does the calculator assume?
Generic products: sodium bicarbonate to raise alkalinity, sodium bisulfate (pH-minus) to lower pH and alkalinity, sodium carbonate (pH-plus) to raise pH, and chlorine granules (dichlor, 56% available chlorine). Does your product have a different concentration? Then also follow the label.
How does the calculation work?
We calculate with the carbonate balance of water at around 37 °C. From your pH and alkalinity we derive how much acid or base the water can absorb, and from that how many grams take you to pH 7.4 and alkalinity 100 mg/l. The result is a guideline: always dose half first and measure again.
What if chlorine is too high?
Do not add chlorine. Leave the cover open with the pump running and the level drops by itself. Measure again before using the spa.






